Name: NRS Frame Cooler Mount
Brand: NRS
Price: 109.95 USD
Availability: InStock
Rating: 4.3 (12 reviews)

Product Details

The NRS Frame Cooler Mount is an excellent accessory for suspending your cooler from the frame in your raft or cataraft.

The Cooler Mount supports the bottom of the cooler 11" from the tops of the cross bars and prevents the cooler from swiveling and shifting.
The top of one side of the aluminum mount is bent to cup snugly over our 1 5/8" OD frame pipe.
The other side of the mount attaches to its cross bar with the NRS HD Tie Down Strap webbing that laces through the aluminum pieces, allowing adjustment for cooler width.
The aluminum support pieces are curved for a supportive fit to the cooler.
A pair of NRS 6' Loop Straps are included for holding the cooler firmly in place.
When a cooler is used as a rowing seat or for passenger seating, the NRS Cooler Mount prevents the cooler from swiveling from the person's weight.

More Information

Weight:	3.3 lbs.
Material:	Aluminum support pieces, laced with NRS 1" HD Tie Down Straps
Includes:	Pair of 6' Loop Straps
Features:	11" depth 100 degree rounded corner bend to fit cooler bottom

NRS Cooler Mounts & Drybox Mounts are pre-adjusted to fit most large coolers or dryboxes.
Find the precise width adjustment of the bottom of your cooler or dry box by turning it upside down and laying the mounts on top.
Adjust the straps so that the aluminum corners align with your cooler or dry box. You may need to work the straps through the brackets to get a good fit.
While adjusting the straps, be sure that the buckle is as close to the aluminum plate as possible.
When the width has been adjusted correctly, take the mounts off the bottom of the cooler or dry box.
To secure the mounts to the frame, place the metal hooks over the rear crossbar of the assembled frame. For cat frames be sure to attach the adjustable strap portion to the yoke for balanced fit.
Loop the strap tail over the opposite crossbar and insert the tail of the strap through the buckle and tighten at the desired angle.
The base of the cooler mount is ready for the cooler or dry box.
To secure the lid of the cooler or dry box, use the two loop straps.

Note: It is best to get the fit adjusted before you set out on your trip and before you have your cooler or drybox filled.

NRS Frame Cooler Mount