NRS 22' Gear Boat Standard Floor Raft
This product is no longer available, but we’ve got more options for you:
Product Details
Built for big loads and big water, this 22' NRS Gear Boat can be guided with oars, sweep oars or motor. Lots of D-rings for attaching floor boards and gear.
- Specifics about this item: This is a prototype gear boat that was used by an outfitter for a short period of time. It is basically new, no patches, just some frame marks. Does not include a repair kit.
- 22' feet long, with 36" diameter tubes, this boat will haul large loads while still floating high in shallower waters.
- Every thing about this big raft is burly. The material is 48 ounce/1670 denier Pennel Orca, used in all our commercial-grade Expedition-series boats.
- 54 3" D-rings provide plenty of options for securing heavy loads.
- HD40 wear material wraps up halfway on the tubes, and higher on the inside and outside of the straight tube sections, for ultimate protection.
- This boat has a standard, non-self bailing floor. It's designed to have floor boards suspended from those inner D-rings.
- Four tube chambers ensure extra security in emergency situations.
- Trouble-free Leafield™ C7 Valves ensure easy inflation/deflation of the tubes.
- Warranty: 8 year retail & 4 years commercial
Specs
Length: | 22' |
---|---|
Width: | 9' 4" |
Weight: | 342 lbs. |
Tube Diameter: | 36" |
Number of Thwarts: | 0 |
Bow Kick: NRS measures kick from floor level to the top of the end tubes. AIRE measures this to the bottom of the end tubes. |
48" |
Stern Kick: NRS measures kick from floor level to the top of the end tubes. AIRE measures this to the bottom of the end tubes. |
48" |
Number of Air Chambers: | 4 |
Valve Type: | Leafield - C7 |
Self Bailing: | No |
Type of Material: | Pennel Orca |
Weight/Denier of Tube Material: Weight is ounces of a square meter of the material. Denier is the weight in grams of 9,000 meters of the thread used in the woven base fabric; an indicator of the fabric's strength. |
48/1670 |
Weight/Denier of Floor Material: Weight is ounces of a square meter of the material. Denier is the weight in grams of 9,000 meters of the thread used in the woven base fabric; an indicator of the fabric's strength. |
48/1670 |
Number of D-rings: | 54 |
Number of Handles: | 0 |
Center Compartment Width: The internal distance between the side tubes. Helpful for determining the size of coolers and dry boxes that will fit. Boats are hand-built and dimensions can vary 1”-2”. Measure your boat before purchasing containers. |
39" |
Suggested NRS Frame Width: Our frames come in 6" width increments. The frame side rails should span from center-to-center of the raft tubes, or slightly beyond. |
Center-to-center is 76" |
Maximum Frame Length: | 120" |
Repair Kit: | No |
Warranty: Some products have a fixed period of time that the manufacturer will cover them. Warranty for most NRS products is explained in our Rock Solid Guarantee (see at bottom of page). |
8 Years Retail, 4 Years Commercial |